Philips HD8844 - MACHINE ADJUSTMENTS; CoffeeSwitch Lever Operation

20 ENGLISH
4
Put the “INTENZA+” water  lter into the empty water tank. Press it
down until it cannot move any further.
5
Fill the water tank with fresh water and put it into the machine.
6
Dispense all the water in the water tank by using the hot water func-
tion (see the “Hot Water Dispensing” chapter).
7
Fill the water tank again.
8
Press the “ ” button and scroll the options by pressing the “ ” button
until this display is shown.
9
Press the “ ” button to access the function.
10
Press the “ ” button to select “ON” and press the “ ” button to con rm.
YellowYellow YellowYellowGreenGreen
11
To exit, press the “ ” button.
12
The machine shows this display and is ready to brew.
The machine is now programmed to inform the user of the need to replace
the "INTENZA+" water  lter.