37
User Manual BDH5011
10.8 Signal Frequency
Information Display
Displaying Frequency of Signal
This display is capable of displaying the frequency
level of the signal being displayed. To see signal
frequency information:
1. Press the MENU +/- buttons on the remote
control or the front control panel.
2. Use the ADJ +/- buttons to navigate to the
OTHER OSD sub-menu.
A
INPUT H-FREQ (KHZ)
Displays the horizontal signal frequency of the
signal currently displayed. Use the frequency
cross reference tables below to see which type
of signal is being displayed under various input
modes.
INPUT V-FREQ (HZ)
Displays the vertical signal frequency of the
signal currently displayed. Use the frequency
cross reference tables below to see which type
of signal is being displayed under various input
modes.
A
When Using AV1 and AV2 Inputs
Horizontal Vertical Format
15.7 60 NTSC Video
15.6 50 PAL Video
When Using Component 1 & 2 Inputs
Horizontal Vertical Format
15.7 60 NTSC Video
15.6 50 PAL Video
15.7 60 480i (SDTV)
31.5 60 480p (EDTV)
33.0 60 1080i (HDTV)
45.0 60 720p (HDTV)
To Next Page
Loading...
Need help?
General
