Philips HP L1502 - Re-programming Analog DDC IC; Step 2: Read DDC data from monitor; Step 3: Modify DDC data (verify EDID version, week, year)

X
Go to cover page
21
HP L1730
DDC Instructions
22
HP L1502
Re-programming Analog DDC IC
Step 1: After initialize alignment box, connecting all cables and
box as shown in Fig. 11
Fig. 12
Step 2: Read DDC data from monitor
1. Click icon as shown in Fig. 12 from the tool bar to bring up
the Channels "Configuration Setup" windows as shown in Fig. 13.
Step 3: Modify DDC data (verify EDID version, week, year)
1. Click (new function) icon from the tool bar, bring up
Step 1 of 9 as shown in Fig. 15 .
EDID45 DDC application provides the function selection and
text change (select & fill out) from Step 1 to Step 9.
Step 4: Modify DDC data (Monitor Serial No.)
Next1. Click , bring up Fig. 16.
2. Click , bring up Fig. 17.Next
3. Click OK button to confirm your selection.
4. Click icon (Read EDID function) to read DDC EDID data from
monitor. The EDID codes will display on screen as shown in Fig. 14.
Fig. 16
Fig. 17
2. Select the DDC2Bi as the communication channel.
As shown in Fig. 13.
Fig. 14
Fig. 15
Fig. 11
1=Power connector
2=D-SUB connector
~
~
PC
To printer port (LTP1)
DC Power
5V
Printer
Port
To
Monitor
To P C
1
2
----->
----->
Don't close this screen. --->
Fig. 13
To PC Video port (D-sub)
Select and fill out,
If necessary.