Philips HR2665 - Danger; Warning

7
ENGLISH
Danger
• Never immerse the motor unit in water or any other liquid and do not rinse it under the
tap. Use only a moist cloth to clean the motor unit.
Warning
• Do not use the appliance if the plug, the power cord or other parts are damaged or have
visible cracks.
• Unplug the appliance when not in use.
• Before you connect the appliance to the power, make sure that the voltage indicated on
the bottom of the appliance corresponds to the local power voltage.
• Before you insert the plug into the power outlet, make sure that the appliance is
assembled correctly.
• Thoroughly clean the parts that come into contact with food before you use the appliance
for the rst time. Refer to the instructions in the manual.
• Do not put heavy objects on the appliance.
• Do not move the appliance while it is operating.
• Do not use a dishwasher to clean the appliance.
• Make sure to tighten the front panel knobs during assembly.
• Make sure the appliance is not plugged in when assembling the appliance.
• Pour in the liquid slowly through the water slot after the appliance starts mixing.
• Do not put any ingredients that are 60°C/140°F or above into the pasta maker, nor place
the pasta maker in surroundings with high temperature (60°C/140°F), for instance in a
high temperature sterilization. This will damage the appliance.
• Never pour water into the mixing chamber before you place the chamber lid onto the
chamber.
• Do not pour any liquids into the safety switch hole.
• Do not select the extrusion only program before the dough is mixing complete. Otherwise,
this will damage the pasta maker.
• Do not use a scourer, caustic cleaner, or cleaners (for example, gasoline, alcohol, and
propanol) to clean the appliance.
• Clean the appliance after each use or the appliance might not operate properly.
• Do not insert any objects into the appliance.
• Take extra caution when cleaning the appliance to avoid getting cut by any sharp edges.
• Switch o the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
• Never reach into the mixing chamber when the appliance is plugged in.
• To prevent a short circuit or an electric shock, do not pour water or any liquid onto the
display.