17
Play from radio
The home theater can store up to 40 radio
stations.
1 Check that the FM antenna is connected.
2 Press RADIO.
» “AUTO INSTALL...PRESS PLAY’ appears
on the display panel if you have not
installed any radio stations. Press (Play).
3 Press the following buttons to control play:
Button Action
/
Selects a preset radio station.
Navigation
buttons
(left/right)
Searches for a radio station.
Navigation
buttons
(up/down)
Fine tunes a radio frequency.
Press and hold to erase the preset
radio station.
Press to stop the installation of
radio stations.
(Options)
Manual: Press once to access
program mode, and press again to
store the radio station.
Automatic: Press and hold for ve
seconds to reinstall radio stations.
RADIO Toggles between stereo and mono
sound.
Note
• AM and digital radio are not supported.
• If no stereo signal is detected, or if fewer than
ve stations are found, you are prompted to
install the radio stations again.
• For the best reception, place the antenna away
from the TV or other sources of radiation.
Play audio from TV or other
devices
Press AUDIO SOURCE repeatedly to select
the audio output of the connected device (see
‘Connect audio from TV or other devices’ on
page 999).
Browse Net TV
With the home theater connected to the Internet,
you can use Net TV to access videos, pictures,
music, information, games and other online
services.
Note
• Koninklijke Philips Electronics N.V. bears no
responsibility for content provided by Net TV
service providers.
Access Net TV
1 Prepare the internet connection and set up
the network (see ‘Connect to a computer
network and the Internet’ on page 10).
2 Press (Home).
» The home menu appears.
3 Select [browse Net TV], then press OK.
» The Net TV home page appears.
4 Press the Navigation buttons to navigate
Net TV web pages or services.
5 Press OK to view or select an item.
6 Press (Back) to return to the previous
page, or press (Home) to exit.
Clear browsing history
Clear browsing history to remove passwords,
cookies and browsing data from your home
theater.
1 Press (Home).
2 Select [Setup], then press OK.
3 Select [Network] > [Clear Net TV
Memory], then press OK .
Engli s h
EN
To Next Page
Loading...
