Philips HTS9520 - Play from an MP3 Player; Play from an Ipod or Iphone

18
Watch video or view slideshows
Note
• On iPod, enable the TV ON setting.
• On iPhone, select the TV Out option.
1 Dock your iPod or iPhone (see ‘Dock your
iPod or iPhone’ on page 18).
2 Switch the TV to the AV/VIDEO source
(corresponding to the yellow composite
cable).
» The TV screen goes blank.
3 Browse on the iPod or iPhone screen to
select videos or photos.
4 Press (Play) to play the video and photos.
» The picture is displayed on the TV.
Play from an MP3 player
Connect and play audio les from an MP3 player
or other external audio devices.
1 Connect the MP3 player to the home
theater.
2 Press AUDIO SOURCE repeatedly until
‘MP3 LINK’ appears on the display panel.
3 Press the buttons on the MP3 player to
select and play audio les.
Play from an iPod or iPhone
By connecting and installing a Philips Dock for
iPod/iPhone, you can use the home theater to
play music, movies and photos from your iPod or
iPhone.
Note
• Philips Dock for iPod/iPhone is sold separately.
• You can charge your iPod/iPhone on the dock
while the home theater is in iPod mode.
Dock your iPod or iPhone
1 Connect the dock to the home theater and
connect the yellow composite cable from
the dock to the TV. For more information,
see the Quick Start provided with the dock.
2 Switch on the iPod or iPhone and place it in
the dock.
3 On the home theater remote control, press
(Home), then select [browse iPod] and
press OK.
Listen to music
1 Dock your iPod or iPhone (see ‘Dock your
iPod or iPhone’ on page 18).
2 Press DOCK for iPod on the home theater
remote control.
» The playlists are displayed on the TV.
3 Press the Navigation buttons and OK to
select and play tracks.
EN