EasyManua.ls Logo

Philips HTS9800W - Technical Specifications; Amplifier, Centre Unit, and Tuner Specs; Subwoofer, Speaker, and Receiver Box Specs

Philips HTS9800W
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
49
English
Speci cations
AMPLIFIER SECTION
Output power 800 W
Front Left/Right 125 W / channel
Front Centre 125 W / channel
Rear Left/Right 85 W / channel
Rear Centre 105 W / channel
Subwoofer 150 W / channel
Frequency Response 20 Hz – 6 kHz / –3 dB
Signal-to-Noise Ratio > 65 dB (CCIR)
Input Sensitivity
– AUX In 1000 mV
– TV In 500 mV
TUNER SECTION
Tuning Range FM 87.5 – 108 MHz
(50 kHz)
26 dB Quieting Sensitivity FM 20 dB
Image Rejection Radio FM 25 dB
IF Rejection Ratio FM 60 dB
Signal-to-Noise Ratio FM 60 dB
AM Suppression Ratio FM 30 dB
Harmonic Distortion FM Stereo 3%
Frequency Response FM 180 Hz – 10 kHz / ±6 dB
Stereo Separation FM 26 dB (1 kHz)
Stereo Threshold FM 23.5 dB
DISC SECTION
Laser Type Semiconductor
Disc Diametre 12cm / 8cm
Video Decoding MPEG-1 / MPEG-2 / MPEG-4
/ DivX 3.11, 4.x, 5.x and 6.0
/ XviD
Video DAC 12 Bits / 108 MHz
Signal System PAL / NTSC
Video Format 4:3 / 16:9
Video S/N 56 dB (minimum)
Composite Video Output
1.0 Vp-p, 75 W
Audio DAC 24 Bits / 96 kHz
Frequency Response 4 Hz – 20 kHz (44.1 kHz)
4 Hz – 22 kHz (48 kHz)
4 Hz – 44 kHz (96 kHz)
PCM IEC 60958
Dolby Digital IEC 60958, IEC 61937
DTS IEC 60958, IEC 61937
SACD D/A converter PCM
SACD cut-off frequency 50 kHz
CENTRE UNIT
Power Supply Rating 220 – 230 V; 50 Hz
Power Consumption 15W
Standby Power Consumption < 0.5 W
Dimensions 273 x 284 x 144 mm
(w x h x d)
Weight 2.8 kg
AV SUBWOOFER
Power Supply Rating 220 – 230 V; 50 Hz
Power Consumption 150 W
Standby Power Consumption < 0.5 W
System Bass Re ex System
Impedance 4
Speaker drivers 165mm (6.5”) woofer
Frequency response 30 Hz – 120 Hz
Dimensions 300 x 399 x 300 mm
(w x h x d)
Weight 12 kg
LEFT/ RIGHT SPEAKERS
System 2-way, closed box system
Impedance 6
Speaker drivers 2 x (3”x3”)  at cone woofer
+ 1 x (1”x 4”) ribbon
tweeter
Frequency response 120 Hz + 20 kHz
Dimensions 106 x 1220 x 32 mm
(w x h x d) (height including stand)
Weight 4.75 kg/each (including
stand)
CENTRE FRONT/ REAR SPEAKERS
System 2-way, closed box system
Impedance 6
Speaker drivers 2 x (3”x3”)  at cone woofer
+ 1 x (1”x 4”) ribbon
tweeter
Frequency response 120 Hz + 20 kHz
Dimensions 497 x 139 x 32 mm
(w x h x d) (height including stand)
Weight 1.5 kg/each (including base)
AV WIRELESS RECEIVER BOX
Power Supply Rating 110 – 240 V; 50 - 60Hz
Power Consumption 60 W
Standby Power Consumption < 0.5 W
Dimensions 242.5 x 157 x 117.5 mm
(w x h x d)
Weight 1.56 kg
JUNCTION BOX
Dimensions 182 x 35 x 62 mm
(w x h x d)
Weight 0.27 kg
Speci cations subject to change without prior notice.

Table of Contents

Other manuals for Philips HTS9800W

Related product manuals