Philips Illuminate - Voice *; Sound-Reactive Lighting Effects

Illuminate™ www.seasonalspecialties.com Page 16 of 26
Rev 082015
Voice *
Illuminate™ will react to any sounds being made while play button is pressed.
Tip: Use this mode to pick up music in the room from other sources such as a stereo, and use
it to change the lights to music from streaming music sources when playing through your smart
device speakers or from a Bluetooth speaker located near your smart device (both the
streaming app and illuminate app must be open at same time).
* - This feature is only applicable to control boxes manufactured in 2015 or later.
On/Off: Turn the
illumnate lights on
and off.
Menu: Navigate
between the
different parts of
Illuminate.
Play: While play
button is active any
sounds picked up by
your smart devices
internal microphone
will cause the lights
to change colors.
Press the “pause”
button to stop it
from flashing the
lights.
Sensitivity: This bar
will increase the
sensitivity of your
Illuminate lights, use
this to adjust the
sensitivity of the
lights falshing and
changing colors to
soft or loud sounds.