Illuminate™ www.seasonalspecialties.com Page 21 of 26
Rev 082015
3. Type your own name for the saved function group in the Functions Name field. Tap
Confirm. The functions currently running on your lights connected to the Illuminate™
Starter Kits are saved.
Load Functions
1. While in Network mode for all your Illuminate™ sets.
2. Tap the Menu icon and select Home. The Home screen opens. From the Home
screen, tap the Menu icon again and select Load Functions. The Load Functions
screen opens.
3. Select the function group you wish to apply to your currently networked Illuminate™
strings. Tap Send to apply the functions.
Use and Care Instructions
1. Do not install or leave control boxes inside gutters or other areas where standing water will
collect.
2. Do not pull on connections or lampholders when decorating or removing for the season.
3. When not in use, store unit in cool, dry location protected from sunlight.
4. Avoid stacking other products on this item to avoid bulb breakage or other damage.
5. Make sure all plugs and cords are well-protected from being cut, crushed, or abraded, do
not place on top of sharp edges or materials.
To Next Page
Loading...
