Philips IRT 9090/01 - Creating Zones in a Group

SpaceWise for Industrial Applications
v. 1.6
Philips Lighting North America
15
8. Creating zones in a group
Up to 16 zones can be created within a SpaceWise group and each luminaire can be part
of just one zone.
When a group is created with zones, occupancy detected by one SpaceWise luminaire is
distributed across the zone and also across the whole group. All luminaires within the
zone will react in the same way to any sensor in the zone. All other luminaires that are in
the same group but in a different or no zone will react on the occupancy signal by going
to background level.
Zones can only be created within a group so a group should be created first as per the
instructions in section 4.
a.
Point remote to any luminaire and press
“unlock,” once.
Wait for LED to stop blinking (apx. 10
seconds).
Red LED on remote will start
blinking.
Red LED on remote will stop
blinking.
Group
Zone