Philips IRT 9090/01 - Occupancy Coverage Walk Test

SpaceWise for Industrial Applications
v. 1.6
Philips Lighting North America
24
12. Test occupancy coverage area (walk test)
a.
Point remote to any luminaire and press
“unlock,” once.
Wait for LED to stop blinking (apx. 10
seconds).
Point remote to any of the luminaires
and press “send.”
Red LED on remote will start
blinking.
Red LED on remote will stop
blinking.
The luminaire will FLASH twice
and group light level will go to
50%.
b.
Point remote to any of the luminaires
and press “test.”
To stop the test feature, press the “test”
button again.
Test feature is activated; users
can now walk in the space to
estimate the occupancy coverage
area.