Philips IRT 9090/01 - Maximum Light Output Settings

SpaceWise for Industrial Applications
v. 1.6
Philips Lighting North America
12
7. Maximum light output selection
Choice of max light output per group will be influenced by existing conditions such as partition
height, reflectances, light level preference and energy goals.
Light output setting
Percentage
High
100%
Medium (default)
88%
Low
77%
Minimum
66%
a.
Point remote to any luminaire and press
“unlock,” once.
Wait for LED to stop blinking (apx. 10
seconds).
Point remote to any of the luminaires
and press “send.”
Red LED on remote will start
blinking.
Red LED on remote will stop
blinking.
The luminaire will FLASH twice
and group light level will go to
50%.