Philips IRT 9090/01 - Page 27

SpaceWise for Industrial Applications
v. 1.6
Philips Lighting North America
26
a.
Point remote to any luminaire and press
“unlock,” once.
Wait for LED to stop blinking (apx. 10
seconds).
Point remote to any of the luminaires
and press “send.”
Red LED on remote will start
blinking.
Red LED on remote will stop
blinking.
The luminaire will FLASH twice
and group light level will go to
50%.
b.
Press “pir” button.
While the LED is still blinking red, enter
the numbers:
“11”: Enable path of egress feature
“10”: Disable path of egress feature
Red LED on remote will start
blinking.
Red LED on remote will stop
blinking.