Philips KV-S5055C - Page 74

74
8.5.16. DFP Pressure Motor
1. Remove the Left Cover. (See 8.5.9.)
2. Remove the Hopper Plate Assembly. (See 8.5.13.)
3. Remove the screw (a) and 4 screws (b) on the Reinforcement
Plate.
4. Remove the screw (a) on the left side.
5. Pull upward and remove the Reinforcement Plate.
6. Remove the 4 screws, and then raise the DFP Pressure Motor
with plate.