84
8.5.30. Conveyor 2
8.5.31. Drive Roller 3
1. Remove the Left Cover. (See 8.5.9.)
2. Remove the Right Cover. (See 8.5.1.)
3. Remove the Rear Cover. (See 8.3.2.)
4. Remove the screw with a washer on the right, as seen from
the back.
5. Remove the screw on the left, as seen from the back.
6. Remove the Conveyor 2.
1. Remove the Conveyor 2. (See 8.5.30.)
2. Remove the Power Box. (See 8.5.6.)
3. Remove the Drive Belt. (See 8.5.11.)
4. Remove the spring, and then pull out the Drive Roller 3.
To Next Page
Loading...
