6
Choosing a language and country
Automatic tuning
& Press the
H
key to display the main menu.
é Select INSTALL (
Ï
), then press
¬
.
The INSTALL menu appears.
The LANGUAGE option is activated.
“ Press
¬
to go into the LANGUAGE menu.
‘ Select your language with the
îÏ
keys.
The menus will appear in the chosen language.
( Press
È
to exit the LANGUAGE menu.
§ Select the option COUNTRY and press
¬
.
è Select your country with
îÏ
keys.
If your country does not appear in the list, select
OTHER.
! Press
È
to exit the COUNTRY menu.
ç To exit from the menus, press
d
.
See also: EasyLink function below.
This menu allows you to automatically search
for all the programmes available in your region
(or on your cable network).
& First carry out operations & to ! above, then:
é Press
Ï
once to select AUTO STORE then
press
¬
.The search begins.
After several minutes, the INSTALL menu
reappears automatically.
“ If the transmitter or the cable network
broadcasts the automatic sort signal, the
programmes will be correctly numbered.
‘ If not, the programmes found will be
numbered in descending order starting at 99,
98, 97, etc.
Use the SORT menu to renumber them.
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.).
Where this is the case, make your choice using the
îÏ
keys and confirm with
¬
.
To exit or interrupt the search, press the
H
key. If
no picture is found, refer to the chapter entitled
Tips on p. 16.
See also: EasyLink function below.
( To exit from the menus, press
d
.
• PICTURE
• SOUND
• FEATURES
• INSTALL
INSTALL
• LANGUAGE
• COUNTRY
• AUTO STORE
• MANUAL STORE
• SORT
•
NAME
ENGLISH
DANSK
NEDERLANDS
INSTALL
• LANGUAGE
• COUNTRY
• AUTO STORE
• MANUAL STORE
• SORT
•
NAME
SEARCHING
PLEASE WAIT
PROG. NO. 2
215.18 MHZ
If the set is connected (by the EXT2 socket)
to a video equipped with the EasyLink
function, the language, country and channels
found are automatically transmitted to the
video recorder at the time of installation.
A message is displayed on-screen during
loading.The list of video recorder channels is
then the same as those of the set.
The EASY LINK setting in the OPTIONS menu
must be set to ON (default setting), see page 9.
EasyLink function
(only available on certain versions)
5
Quick installation
Sorting programmes
The first time you switch on the television, a
menu appears on the screen.This menu asks
you to choose the language of the menus :
If the menu does not appear, hold down the
”
- and
”
+ keys on the set for 5 seconds to bring it up.
& Use the
îÏ
keys on the remote control to
choose your language then confirm with
¬
.
é Then select your country using the
îÏ
keys and confirm with
¬
.
If your country does not appear in the list, select “. . .”
“ Tuning starts automatically.
The operation takes several minutes.
A display shows the search status and the
number of programmes found.When it has
finished the menu disappears.
To exit or interrupt the search, press the
H
key.
If no programmes are found, refer to the chapter
entitled Tips on p. 16.
‘ If the transmitter or the cable network
broadcasts the automatic sort signal, the
programmes will be correctly numbered.
( If not, the programmes found will be numbered
in descending order starting at 99, 98, 97, etc.
Use the SORT menu to renumber them.
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.).
Where this is the case, make your choice using the
îÏ
keys and confirm with
¬
.
See also: EasyLink function, page 6.
& Press the
H
key.The main menu is displayed.
é Select INSTALL (
Ï
), then press
¬
.
The INSTALL menu appears.
“ Using the
Ï
key, select SORT then press
¬
.The SORT menu appears.The FROM
option is activated.
Note:
this menu works as follows:
• Change "FROM" (enter the current programme
number),
• "TO" (enter the new number),
• EXCHANGE numbers" (the operation is carried out).
‘ Select the programme you wish to renumber
using
Ȭ
keys or
0
to
9
.
Example: to renumber programme 78 as 2
press
78
.
( Select TO (using
Ï
key) and enter the new
number with
Ȭ
keys or
0
to
9
(for
the example given, enter
2
).
§ Select EXCHANGE (
Ï
key) and press
¬
.
The message EXCHANGED appears, the
exchange takes place. In our example,
programme 78 is renumbered as 2 (and
programme 2 as 78).
è Select the option FROM (
î
key) and repeat
stages ‘ to § as many times as there are
programmes to renumber.
See also: EasyLink function, page 6.
! To exit from the menus, press
d
.
• PICTURE
• SOUND
• FEATURES
• INSTALL
INSTALL
• LANGUAGE
• COUNTRY
• AUTO STORE
• MANUAL STORE
• SORT
• NAME
FROM
TO
EXCHANGE
SELECT LANGUAGE
LANGUAGE
•
ENGLISH
DANSK
NEDERLANDS
FINNISH
FRANCAIS
COUNTRY
AUSTRIA
BELGIUM
SWITZERLAND
GERMANY
DENMARK
To Next Page
Loading...
Need help?
General
