Philips LX600 - Specifications

EU FM 87.5M 108M 50K
MW 531K 1602K 9K
APAC FM 87.5M 108M 100K
MW 531K 1602K 10K
AREA BAND FREQUENCY (Hz) STEP(Hz)
SPECIFICATIONS
AMPLIFIER SECTION
Output power 6000 PMPO
- Front 100W RMS / channel
- Rear 100W RMS / channel
- Center 100W RMS
- Subwoofer 100W RMS
Frequency Response 150 HZ - 20 kHz / -3 dB
Signal-to-Noise Ratio > 60 dB (CCIR)
Input Sensitivity
- TV In 500 mV
- AUX In 500 mV
- 6 Channel In 800 mV
TUNER SECTION
Tuning Range FM 87.5-108 MHz (50 kH) (for / 01)
FM 87.5-108 MHz (50kH /100kH)
(for / 69)
MW531 - 1602 kHz (9kHz)
MW530 - 1700 kHz (10kHz) (for /69)
26 dB Quieting Sensitivity FM 22 dBf
5 uV / m
Signal-to-Noise Ratio FM 55 dB
MW 40 dB
Harmonic Distortion FM Mono 3%
FM Stereo 3%
MW5%
Frequency Response FM 180 Hz-10kHz/±6 dB
Stereo Separation FM 26 dB(1 kHz)
Stereo threshold FM 23.5 dB
1-3
MAIN UNIT
Power Supply Rating 220-240V; 50Hz (for / 01)
Power Supply Rating 110-127/ 220-240V; 50/60Hz
Switchable (for / 69)
Power Consumption 180 W
Dimensions (w x h x d) 435mm x 54mm x 388mm
Weight 4.16 kg
SPEAKERS
Front Speakers / Rear (surround) speaker
System 2-way. closed box system
Impedance 3W
Speaker drivers 18mm cone dome tweeter
Frequency response 150 Hz - 20 kHz
Dimensions (w x h x d) 93mm x 169mm x 65mm
Weight 0.75 Kg / each
CENTER SPEAKER
System 2-way. closed box system
Impedance 3W
Speaker drivers 18mm cone dome tweeter
Frequency response 150 Hz - 20 kHz
Dimensions (w x h x d) 245mm x 93mm x 70mm
Weight 1.37 Kg
PASSIVE SUBWOOFER
Frequency response 30 Hz - 150 kHz
Dimensions (w x h x d) 156mm x 350mm x 360mm
TUNER AREA: