Philips LX8300SA - Automatic Presetting; Manual Presetting; Selecting a Preset Radio Station; Deleting a Preset Radio Station

English
39
3139 115 23271
Automatic presetting
You can start the automatic presetting
from a selected preset number.
1
3
02
FM / MW
AUTO
2
1 Press SOURCE control to select
“TUNER FM” or “TUNER MW”.
2 Press 1 2 or use the numeric keypad
(0-9) to select a preset number to begin.
3 Press and hold PROGRAM until "AUTO"
appears.
➜ If a radio station is stored in one of the
earlier presets, the same radio station will
not store under another preset number.
➜ If no preset number is selected,
automatic preset will begin from preset
(1) and all your former presets will be
overridden.
Manual presetting
You can choose to store only your
favourite radio stations.
1 Tune to your desired radio station (see
“Tuning to radio stations”).
2 Press PROGRAM.
3 Press 1 2 to select a preset number.
4 Press PROGRAM again to store.
Selecting a preset radio
station
● Press 1 2 or use the numeric keypad
(0-9) to select a preset number.
➜ The waveband, preset number followed
by radio frequency will appear.
Deleting a preset radio station
● Press and hold 9 until “MWXX
DELETED” or “FMXX DELETED”
appears.
➜ The current preset radio station will
be deleted.
Tuner Operations
DVD system’s
display panel
001-047-LX83-22-Eng 6/9/04, 2:03 PM39
Downloaded From TheatreSystem-Manual.com Manuals