42
3139 115 23271
English
Dimming system’s display
screen
● In any active mode, press DIM on the
remote to select the desired brightness :
DIM 1 : 70% brightness
DIM 2 : 50% brightness
DIM 3 : 25% brightness
DIM OFF : normal brightness
Setting the Sleep timer
The sleep timer enables the system to
switch to Eco Power standby mode
automatically at a preset time.
1 Press and hold DIM on the remote until
“SLEEP XX” appear on the display panel
(XX = 15, 30, 45, 60 or OFF).
2 To select the next sleep timer value,
continue pressing DIM button while in
sleep timer mode until it reaches the
desired preset turn-off time.
➜
SLEEP will show on the display panel,
except if "OFF" is selected.
➜ Before the system switches to Eco
Power standby mode, a countdown of 10
seconds is displayed.
"SLEEP10" ™ "SLEEP 9".... ™
"SLEEP1" ™ "SLEEP"
To cancel the sleep timer
● Press and hold DIM until "OFF" appears
or press the STANDBY ON (B)
button.
Recording to an external
device
1
Connect the external recording device to
LINE OUT (R/L). (See page 14
“Connections-optional“).
2 Select the source to record from your
DVD system (DISC, TUNER, TV or
AUX/DI) and start playback (if
necessary).
3 For ultimate recording, press SOUND
to select ‘CLASSIC’ or ‘CONCERT’ and
press SURR to select ‘STEREO’.
4 Start recording on the external recording
device.
Helpful Hint:
– Refer to the owner’s manual of the
connected equipment for details.
Other Functions
001-047-LX83-22-Eng 6/9/04, 2:03 PM42
Downloaded From TheatreSystem-Manual.com Manuals
To Next Page
Loading...
