Philips M2805 - Bluetooth Audio Playback; System Settings Menu; Accessing System Settings; Setting System Language

13
EN
8 Play from
Bluetooth
enabled devices
1 Press to select the Bluetooth source
using the remote control.
» [BT] is displayed.
» The Bluetooth LED indicator ashes blue.
2 On your device that supports Advanced
Audio Distribution Prole (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of your Bluetooth device).
3 Select “Philips M2805” on your Bluetooth
enabled device and if necessary input
‘0000’ as the pairing password.
» If you fail to search for “Philips M2805”
or cannot pair with this product, press
and hold for more than 2 seconds
to enter pairing mode.
» After successful pairing and connection, the
Bluetooth LED indicator turns solid blue.
4 Play audio on the connected device.
» Audio streams from your Bluetooth
enabled device to this product.
To disconnect the Bluetooth-enabled device,
deactivate Bluetooth on your device.
Note
• Compatibility with all Bluetooth devices is not guaranteed.
• Any obstacle between this unit and your Bluetooth enabled
device can reduce the operational range.
• The effective operation range between this unit and your
Bluetooth enabled device is approximately 10 meters (33 feet).
• This unit can memorize up to 8 previously connected
Bluetooth devices.
9 Use system
settings menu
1 In working mode, press to access the
main menu.
2 Press the navigation buttons to scroll
through the menu options.
3 Select [System settings], then press [OK]
to conrm.
4 Repeat steps 2 to 3 to select an option.
[Equaliser]: Select equaliser mode.
[Network]: Enable you to establish network connection.
[Time/Date]: Set time and date.
[Language]: Select system language.
[Factory Reset]: Reset the radio to factory default status.
[Software update]: Check the software update information.
[Setup wizard]: Instruct you to perform initial setup.
[Info]: Check the software version.
[Privacy Policy]: View privacy notice.
[Backlight]: Adjust backlight settings.
Note
• If no button is pressed within 15 seconds, the menu will exit.
Set system language
1 Select [System settings] > [Language].
» A language list is displayed.
2 Press the navigation buttons to scroll
through the menu options.
3 Press [SELECT] to conrm.