5
EN
3 Get started
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this product.
Model No. ____________________
Serial No. ____________________
Connect the radio antenna
Connect the supplied radio antenna to this
product before listening to the radio.
Connect power
Connect the power cord to the wall socket.
Caution
• Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the unit.
• Risk of electrical shock! Before you plug the AC power
adaptor, make sure that the adaptor plug converter is
xed securely. When you unplug the AC power adaptor,
always pull the plug, never the cord.
• Before you connect the AC power adaptor, make sure
that you have completed all the other connections.
Place your product
Before you place this product on the table,
attach the supplied table stand to the main unit,
as illustrated below.
Tip
• See the attached wall mounting sheet for how to
mount this product onto the wall.
To Next Page
Loading...
