EN 23
English
Program radio stations
manually
Note
You can program a maximum of 20 preset radio •
stations.
1 Tune to a radio station.
2 Press PROGRAM to activate
programming.
» PROG begins to blink.
3 Press PRESET / to allocate a number
from 1 to 20 to this radio station.
4 Press PROGRAM to confi rm.
» PROG disappears.
5 Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store another •
station in its place.
Tune to a preset radio station
1
Press PRESET / to select a preset
number that you want.
Tip
You can also use the numerical keypad to select a •
preset station directly.
Set RDS clock
You can use time signal broadcast together
with the RDS signal to set the clock of the unit
automatically.
1 Tune to a RDS radio station that
transmits time signals.
7 Tune to FM
radio stations
1 Ensure that you have connected and fully
extended the supplied FM antenna (see
‘Connect FM antenna’ on page 12 ).
2 Press SOURCE on the unit or TUNER
on the remote control repeatedly to
select FM tuner source.
3 Press and hold TUNING / on the
unit or (
/ on the remote control).
4 When the frequency indication starts to
change, release the button.
The FM tuner tunes to a station with »
strong reception automatically.
5 Repeat steps 3-4 to tune to more
stations.
To tune to a weak station:
Press TUNING
/ repeatedly until you fi nd
optimal reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset radio •
stations.
1 Press and hold PROGRAM for more
than 3 seconds to activate automatic
programming.
» [AUTO] is displayed.
All available stations are programmed »
in the order of waveband reception
strength.
To Next Page
Loading...
