Philips MCD289 - 9 Other Features; Adjust Brightness of Display Panel; Set the Alarm Timer; Set the Sleep Timer

26 EN
Set the sleep timer
1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
The unit turns off automatically after »
the set period of time.
Connect other devices
Listen to an audio player
You can listen to audio player through this
unit.
1 Connect a 3.5mm audio cable to
the • AUX-IN jack on the unit
the • AUDIO OUT socket on the
audio player.
2 Start play on the audio player.
9 Other features
Adjust brightness of display
panel
1
In standby mode, press DIM repeatedly
to select different levels of brightness for
the display panel.
Set the alarm timer
1
Ensure that you have set the clock
correctly .
2 In standby mode, press and hold SLEEP/
TIMER .
» [TIMER SET] is displayed briefl y. The
hour digits begin to blink.
3 Press VOLUME -/+ ( + VOL - on the
remote control) to set the hour.
4 Press SLEEP/TIMER to confi rm.
The minute digits are displayed and »
begin to blink.
5 Press VOLUME -/+ ( + VOL - on the
remote control) to set the minute.
6 Press SLEEP/TIMER to confi rm.
» [TUN], [DVD] or [USB] begins to
blink.
7 Press VOLUME -/+ ( + VOL - on the
remote control) to select your desired
source.
8 Press SLEEP/TIMER to complete the
setting.
A clock icon appears on the display.»
The unit turns on automatically at »
the set time and switches to the last
selected source.
To deactivate the alarm timer
1 Press SLEEP/TIMER again.
The clock icon disappears.»