EN 31
English
Wireless connection fails.
Set up wireless connection manually .•
Unable to select Progressive Scan.
Ensure the video output mode is set to •
[Pr/Cr Pb/Cb Y] .
No sound on HDMI connection.
You may not hear any sound if the •
connected device is non-HDCP
compliant or only DVI-compatible.
No picture on HDMI connection.
Check if the HDMI cable is faulty. Replace •
a new HDMI cable.
If this happens when you change the •
HDMI video resolution, select the correct
resolution until the picture appears.
Audio or subtitle languages cannot be set.
The disc is not recorded with sound or •
subtitles in multiple languages.
The audio or subtitle language setting is •
prohibited on the disc.
Cannot display some fi les in USB device or
memory card.
The number of folders or fi les in the USB •
device or memory card has exceeded a
certain limit. This phenomenon is not a
malfunction.
The formats of these fi les are not •
supported.
USB device or memory card not supported.
The USB device or memory card is •
incompatible with the apparatus. Try
another one.
Timer does not work.
Set the clock correctly.•
Switch on the timer.•
Clock/timer setting erased.
Power has been interrupted or the power •
cord has been disconnected.
Reset the clock/timer.•
To Next Page
Loading...
