Philips MCD299/98 - Controls; Controls on the System; Controls on the Remote Control

15
English
Controls
Controls on the system
1 STANDBY-ON y
– switches the system on or to standby mode.
2 Display screen
– shows the status of the system.
3 LEFT ç
– opens/closes the left disc door.
4 RIGHT ç
– opens/closes the right disc door.
5 iR SENSOR
– remote sensor
6 VOLUME -/+
– adjusts the volume level.
7 Disc trays
8 Mode Selection
à / á
for TUNER .................... tunes to a station.
*for DISC/USB ........... fast searches back and
forward within a track/disc.
for Clock/Timer ......... sets the hour.
9 ......................................... stops disc playback or
erases a disc program.
ÉÅ ............................... starts or interrupts
playback.
¡ / ™
for TUNER .................... selects a preset radio
station.
for DISC/USB .............. skips to the previous/next
chapter/title/track.
for Clock/Timer ......... sets the minute.
9 DISC 1/2/3/4
– selects a disc tray for playback.
0 CLOCK
Standby mode
*– sets the system clock.
Playback mode
– displays the system clock.
! SOURCE
– to select the respective sound source : DISC,
USB, TUNER (FM/MW) or AUX.
@ DSC•DBB
*– selects different types of preset sound equalizer
settings (FLAT, POP, CLASSIC, ROCK, JAZZ).
– enables or disables bass enhancement.
# USB DIRECT
– jack for the external USB mass storage device.
Controls on the remote control
1
STANDBY-ON y
– switches the system on or to standby mode.
2 Numeric Keypad (0-9)
– inputs a track/title/chapter number of the disc.
3 PROGRAM
–DVD/VCD/CD/MP3-CD/USB: enters the
program menu.
– Picture CD: during playback, to select a slide
show mode.
–Tuner: programs preset radio stations.
4 SOURCE
– to select the respective sound source: DISC,
USB, TUNER (FM/MW) or AUX.
5 SYSTEM MENU (disc mode only)
– to enter or exit the system menu bar.
6 DISC MENU (disc mode only)
–DVD/VCD: enters or exits the disc contents
menu.
– VCD2.0: switches the playback control mode on
or off .
7 à / á
Tuner
– press to tune to a lower/higher radio frequency
gradually.
– press and hold, then release the key to start
automatic search for a radio frequency
downward/upward.
Disc/USB
– searches fast backward/forward.
– In DISC mode, to select a movement direction in
the disc menu or system menu bar.
–for clock/timer, to set the hour.
8 3/4
– In DISC mode, to select a movement direction in
the disc menu or system menu bar.
– selects different slow playback modes for a VCD/
SVCD/DVD.
* = Press and hold the button for more than three seconds.
pg001-pg020_MCD299-98-Eng-A 2007.9.27, 13:0415