28
English
System Menu Options
Basic operations
1
Press SYSTEM MENU to enter the Setup
Menu.
2 Press à/á to select a page to be set.
3 Press 5/4 to highlight an option.
4 Enter its submenu by pressing 3 or OK.
5 Move the cursor by pressing 5/4 to highlight
the selected item.
6 Press OK to confirm.
To return to the upper-level menu
● Press à.
To exit from the menu
● Press SYSTEM MENU again.
➜ The settings will be stored in the player’s
memory even if the player is switched off.
Note:
– Some of the features in the System Menu
Options are described in “Preparations”.
General Setup Page
The options included in General Setup Page are:
“OSD Lang” and “Screen Saver”.
– – General Setup Page – –
OSD Lang
Screen Saver
OSD Lang
See "Preparations-Step 4: Setting language
preference" for details.
Screen Saver
This function is used to turn the screen saver on
or off.
Audio Setup Page
The options included in Audio Setup Page are:
“Night Mode”, “Digital Output” and “Dolby
Digital Setup”.
– – Audio Setup Page – –
NIGHT MODE
DIGITAL Output
Dolby Digital Setup
Night Mode
➜ On: Select this to level out the volume. High
volume outputs will be softened and low volume
outputs are brought upward to an audible level.
➜ Off: Select this when you want to enjoy the
surround sound with its full dynamic range.
This feature is only available for movies with
Dolby Digital mode.
Digital Output
➜ Digital Off: Tur ns off the digital output.
➜ Digital / Raw: If you have connected your
DIGITAL OUT to a multi-channel decoder/
receiver.
➜ SPDIF / PCM: Only if your receiver is not
capable of decoding multi-channel audio.
pg021-pg044_MCD299-98-Eng-B 2007.9.27, 13:0428
To Next Page
Loading...
