Philips MCD712/12 - 9 Other Features; Activate Demonstration Mode; Adjust Brightness of Display Panel; Set the Alarm Timer

28
6 To activate the wake-up timer, press +
VOL - to select [ON] (on) while [OFF]
(off) is blinking.
A clock icon appears on the display.»
The unit turns on automatically at »
the set time and switches to the last
selected source.
To deactivate the alarm timer, select »
[OFF] (off) at step 6.
Set the sleep timer
1 When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
The unit turns off automatically after »
the set period of time.
Connect other devices
Listen to an audio player
You can listen to audio player with red/white
audio output sockets through this unit.
1 Connect a red/white audio cable (not
supplied) to the AUX IN L/R sockets and
to the audio output sockets on the audio
player.
2 Select the AUX source.
3 Start play on the audio player.
9 Other features
Activate demonstration mode
You can see an overview of all features.
1 In the standby mode with clock display (if
set), press
on the main unit to activate
the demonstration mode.
A demonstration of major available »
features starts.
To deactivate the demonstration mode:
1 Press on the main unit again.
Adjust brightness of display
panel
1 In standby mode, press MODE/DIM
repeatedly to select different levels of
brightness for the display panel.
Set the alarm timer
1 Ensure that you have set the clock
correctly.
2 In standby mode, press and hold SLEEP/
TIMER.
The hour digits are displayed and begin »
to blink.
3 Press + VOL - to set the hour, then press
SLEEP/TIMER again.
The minute digits are displayed and »
begin to blink.
4 Press + VOL - to set the minute.
5 Press SLEEP/TIMER to confi rm.
» [OFF] (off) begins to blink.
EN