19
Program radio stations
manually
Note
You can program a maximum of 20 preset radio
stations.
•
1 Tune to a radio station.
2 Press PROGRAM to activate programming.
3 Press / to allocate a number from
1 to 20 to this radio station, then press
PROGRAM to confi rm.
The preset number and the frequency
of the preset station are displayed.
4 Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store another
station in its place.
•
Tune to a preset radio station
1
Press / to select a preset number
that you want.
Tip
You can also use the numerical keypad to select a
preset station directly.
To enter a 2 or 3-digit number, press SHIFT , then enter
the number.
•
•
Set RDS clock
You can use time signal broadcast together with
the RDS signal to set the clock of the audio
system automatically.
»
7 Tune to FM
radio stations
1 Ensure that you have connected and fully
extended the supplied FM antenna.
2 Press TUNER .
3 Press and hold ( / ).
4 When [SEARCH] (search) is displayed,
release the button.
The FM tuner tunes to a station with
strong reception automatically.
5 Repeat steps 3-4 to tune to more stations.
To tune to a weak station:
Press
( / ) repeatedly until you fi nd
optimal reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset radio
stations.
•
1 Press / to select a preset number to
start programing.
2 Press and hold PROGRAM for 2 seconds
to activate automatic programming.
[AUTO] (auto) appears.
All available stations are programmed
in the order of waveband reception
strength.
The last programed radio station is
broadcast automatically.
»
»
»
»
English
EN
Book_1.indd Sec1:19Book_1.indd Sec1:19 2008-07-29 17:28:112008-07-29 17:28:11
To Next Page
Loading...
