21
Listen to other devices
Caution
Before you connect other devices to the audio system,
ensure that the AC power is unplugged.
•
Note
If the device only provides a mono jack, connect it to
the left jack on the audio system. Alternatively, you can
also use a ‘single to double’ cinch cable.
•
You can listen to other devices through this
audio system.
1 Connect the audio output sockets to
the AUX IN (L/R) sockets on this audio
system.
8 Use more of
your audio
system
Set the alarm timer
1
Ensure that you have set the clock
correctly.
2 In standby mode, press and hold TIMER .
The hour digits are displayed and begin
to blink.
3 Press + VOL - to set the hour.
The minute digits are displayed and
begin to blink.
4 Press + VOL - to set the minute.
5 Press TIMER to confi rm.
6 To activate the wake-up timer, press + VOL
- to select [ON] (on).
A clock icon appears on the display.
The audio system turns on
automatically at the set time and
switches to the last selected source.
To deactivate the alarm timer, select [OFF]
(off) at step 6.
Set the sleep timer
1
When the audio system is turned on, press
SLEEP repeatedly to select a set period of
time (in minutes).
The audio system turns off
automaticaly after the set period of
time.
»
»
»
»
•
»
English
EN
Book_1.indd Sec1:21Book_1.indd Sec1:21 2008-07-29 17:28:122008-07-29 17:28:12
To Next Page
Loading...
