What to do if Philips PicoPix PPX2450 Projector has bad sound quality with computer connection?
If you experience bad sound quality when connecting your computer, consider the following: * Check if the audio cable is connected to the computer's headphone socket or the line-out socket. * Ensure the volume setting on the computer is not set too high.
What to do if only initial screen appears on Philips PicoPix PPX2450 Projector and not the image from the connected computer?
If only the initial screen appears and not the image from the connected computer, please check: * That the VGA-output of the computer is switched on. * If the resolution of the computer is set to 800x600.
General| Resolution | 854 x 480 (WVGA) |
|---|---|
| Contrast Ratio | 1000:1 |
| Projection Technology | DLP |
| Lamp Life | 30, 000 hours |
| Aspect Ratio | 16:9 |
| Built-in Speaker | Yes |
| Keystone Correction | Manual |
| Battery Life | 2 hours in standard mode |
To Next Page