EasyManua.ls Logo

Philips PS27FHDER - Installation, Cords, and Grounding

Philips PS27FHDER
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Important information
Power cords:
Europe: H05VV-F or H05VVH2-F PVC cord with appropriate EU plug.
US and Canada: “hospital grade” cord-set has to be used, provided with instructions to indicate that
grounding reliability can be achieved only when the equipment is connected to an equivalent recepta-
cle marked hospital only or hospital grade. These instructions need to be marked either on the equip.
or on a tag on the power cord
Do not overload wall outlets and extension cords as this may result in re or electric shock.
Mains lead protection: Power cords should be routed so that they are not likely to be walked upon
or pinched by items placed upon or against them, paying particular attention to cords at plugs and
receptacles.
The power supply cord should be replaced by the designated operator only at all time.
Use a power cord that matches the voltage of the power outlet, which has been approved and complies
with the safety standard of your particular country.
Grounding reliability
Grounding reliability can only be achieved when the equipment is connected to an equivalent receptacle.
Liquids and m oisture
Never expose the monitor to liquids or moisture.
Never use the monitor near water - e.g. near a bathtub, washbasin, swimming pool, kitchen sink, laundry
tuborinawetbasement.
The equipment is IP20 compliant.
Ventilation
Do not cover or block any ventilation openings in the cover of the set. When installing the device in a
cupboard or another closed location, heed the necessary space between the set and the sides of the
cupboard.
Installation
Place the device on a at, solid and stable surface that can support the weight of at least 3 devices. If you
use an unstable cart or stand, the device may fall, causing seri
ous injury to a child or adult, and serious
damage to the device.
This apparatus conforms to:
EN 60601-1:2006 +A11:2011 +A1:2013 +A12:2014
IEC 60601-1(ed.3), IEC 60601-1(ed.3);am1
ANSI/AAMI ES60601-1:2005/(R)2012
CSA CAN/CSA-C22.2 NO. 60601-1:14
IEC 60529:1991 + A1: 2000 (Degrees of protection IP code)
IEC 62471: 2006; EN 62471: 2008 (Photobiological Safety Of Lamps And Lamp System)
FCC class B
ICES-001 Level B
RoHS (2011/65/EC)
National Scandinavian Deviations for CL. 1.7.2:
Finland: "Laite on liitettä suojamaadoituskoskettimilla varustettuun pistorasiaan"
Norway: "Apparatet tilkoples jordet stikkontakt"
Sweden: "Apparaten skall anslutas till jordat uttag"
22
K5902101 (451920611531) PS27FHDER 21/05/2015

Related product manuals