Philips SB500B - 6 Specif Cations; 7 Trouble Shooting; General

10
7 Trouble-
shooting
Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to
repair the system yourself.
If you encounter problems when using
this device, check the following points
before requesting service. If the problem
remains unsolved, go to the Philips Web
page (www.philips.com/support). When
you contact Philips, make sure that the
device is nearby and the model number
and serial number are available.
General
No power
• Recharge the speaker.
No sound
• Adjust volume on this product.
• Adjust volume on the connected
device.
• In AUDIO IN mode, make sure that
music playback through Bluetooth
is stopped.
• Make sure that your Bluetooth
device is within the eective
operational range.
No repsonse from the speaker when
pressing any key.
• The speaker is in demo mode. To
exit this mode: press and hold
for
20 seconds.
6 Specif ications
Note
•
Product information is subject to change
without prior notice.
Rated output
power
(Amplier)
2x15W RMS ≤ 1% THD
Acoustic
frequency
response
50-20000 Hz
Speaker driver 2 x 2” full range, 4 Ω
Bass
enhancement
2 x 2.5” passive
radiator
Bluetooth
version
V2.1 + EDR
Bluetooth
supported
proles
HFP V1.6, A2DP V1.2,
AVRCP V1.4
Bluetooth
frequency band
/ Output power
2.402GHz ~
2.480GHz ISM Band
/ ≤ 4dBm (Class 2)
AUX input level 500mV±100mV
Water
resistance
IPX7
Built-in battery Li-ion battery
(7.4 V, 2200 mAh)
Play time in
battery mode
Approx. 8 hours
Charging time Approx. 3.5 hours
USB charging 5V, 2.1A / Micro-USB
socket
Dimensions
- Main unit
(W x H x D) 230 x 101 x 105 mm
Weight -
Main unit 1 kg
EN