Philips Selecon - 8-Bit Mode

8-Bit Mode 21
PL House Light MKII LED Luminaires
User’s Manual
2. 8-Bit Mode
Table 2-1 provides DMX channel mapping of all DMX512 control values when the PL House Light MKII LED
Luminaire is in 8-bit DMX512 mode (as set by the luminaire’s menu system).
Table 2-1: PL House Light MKII LED Luminaire DMX Channel Mapping (8-Bit Mode)
DMX
Channel
Parameter Range DMX Range%
Default -
recommended
console default
values
Description
1 Intensity 0 - 255 0 - 100% 0 8-bit control for Intensity of LED settings.
2 Red 0 - 255 0 - 100% 0 8-bit control of Red LEDs from 0 to full.
3 Green 0 - 255 0 - 100% 0 8-bit control of Green LEDs from 0 to full.
4 Blue 0 - 255 0 - 100% 0 8-bit control of Blue LEDs from 0 to full.
5 White 0 - 255 0 - 100% 0 8-bit control of White LEDs from 0 to full.
6 Preset Color Selection 0 - 255 0 - 100% 12 - 15 (Warm White)
Used to access presets stored in fixture
firmware, such as CCT presets, defined gel
presets, etc.
No Preset Activated = DMX 0-3 (default)
Color Preset 1 (Scratch Pad) = DMX 8 - 11
Color Preset 2 (Warm White) = DMX 12 - 15
Color Preset 3 (Cool White) = DMX 16 - 19
Color Preset 4 (Daylight) = DMX 20 - 23
Color Preset 5 (Arc White) = DMX 24 - 27
Color Preset 6 (Red) = DMX 28 - 31
Color Preset 7 (Yellow) = DMX 32 - 35
Color Preset 8 (Daylight Blue) = DMX 36 - 39
Color Preset 9 (Magenta) = DMX 40 - 43
Color Preset 10 (Aqua) = DMX 44 - 47
Color Preset 11 (Medium Amber) = DMX 48 - 51
Color Preset 12 (Lavender) = DMX 52 - 55
Color Preset 13 (Blue) = DMX 56 - 59
Color Preset 14 (Light Pink) = DMX 60 - 63
Color Preset 15 (Green) = DMX 64 -67
Color Preset 16 (Pink) = DMX 68 - 71
Color Preset 17 (Amber White) = DMX 72 - 75
Color Preset 18 (Dark Fuchsia) = DMX 76 - 79
Color Preset 19 (Light Amber) = DMX 80 - 83
Color Preset 20 (Steel Blue) = DMX 84 - 87
Color Preset 21 (Lt Green/Blue) = DMX 88 - 91
Color Preset 22 (Orange) = DMX 92 - 95
Color Preset 23 (Medium Pink) = DMX 96 - 99
Color Preset 24 (Cyan) = DMX 100 - 103
Color Preset 25 (Purple) = DMX 104 - 107
Color Preset 26 (Custom) = DMX 108 - 111
Color Preset 27 (Custom) = DMX 112 - 115
Color Preset 28 (Custom) = DMX 116 - 119
Color Preset 29 (Custom) = DMX 120 - 123
Color Preset 30 (Custom) = DMX 124 - 127
Color Preset 31 (Custom) = DMX 128 - 131
No Preset Activated = DMX 253 - 255
7 Not used (for future use)
8 Timing 0 - 255 0 - 100% 255
Allows for timing control of both the intensity and
color parameters. Channel should default to 255
for smoothest actions using console and/or
manual fades. Refer to "PL House Light MKII
LED Luminaire DMX Timing Channel Detail" on
page 23 for more information.