Need help?Do you have a question about the Philips SNA6500 and is the answer not in the manual?
Connects to the ADSL line.
Connects the power adapter.
Resets power and restores factory settings.
Connects local area network devices.
Blocks attacks and provides WEP/WPA security.
Positioning the device and connecting the ADSL line.
Setting up phone line and connecting devices via Ethernet.
Connecting the power adapter and checking the indicator.
Initial steps and ADSL connection verification.
Configuring wireless and ISP-specific ADSL settings.
Reviewing and saving configuration settings.
How to confirm a successful internet connection.
Advice for when the connection fails.
Entering ISP parameters and DNS server addresses.
Firewall capabilities against DoS attacks.
Defining traffic rules and limiting access by MAC address.
Using WEP and WPA for wireless network security.
Defining traffic rules and limiting access by MAC address.
Configuring WEP encryption keys.
Using WPA for enhanced wireless security.
Enabling 802.1X for network authentication.
Configuring LAN IP and enabling DHCP.
Enabling wireless, defining channel and security.
Setting up WPA and 802.1X security.
Sharing public IPs and hiding the internal network.
Redirecting requests and configuring ports for applications.
Enabling remote access to manage the base station.
Solutions for off Power or Link LEDs.
Troubleshooting ping and web browser connection problems.
Solutions for lost passwords and wireless client association.
Addressing intermittent wireless network connections.
General| Wi-Fi Bands | Dual-band |
|---|---|
| Frequency Band | 2.4 GHz, 5 GHz |
| Maximum Data Rate | 54 Mbps |
| Security | WEP, WPA, WPA2 |
| Wireless Standards | IEEE 802.11b/g |
| Ports | 4 x LAN, 1 x WAN |
| Antennas | 2 x External Antennas |
To Next Page
