Philips SPF3410/G7 - Connecting to power

Philips Digital Photo Frame
Getting started
EN - 12
• By using the hanging slots, you can hang the PhotoFrame
horizontally or vertically on a wall without extending the adjustable
foot stand.
Connecting to power
1. Place your PhotoFrame on a flat surface.
2. Connect the power adapter as below (1) and slide the power
switch to the “ON” position (2).
• Power systems and plug types may vary depending on your
country/region.
• To turn off the PhotoFrame, slide the power switch to the “OFF”
position.
GN104F00_GN-A18-G7_UM_en.book Page 12 Monday, September 14, 2009 10:57 PM