Philips SPF4608 - Upgrading the PhotoFrame Software

28 EN
9 Upgrade the
PhotoFrame
Caution
•
Do not power off the PhotoFrame during software
upgrade.
If there is a software update, you can download
the latest software from www.philips.com/
support to upgrade your PhotoFrame. The
earlier software is unavailable on line.
1 Visit www.philips.com/support.
2 Search for your PhotoFrame and go to the
software section.
3 Download the latest software onto the
root directory of an SD card.
4 Insert the SD card into the PhotoFrame.
5 Turn on the PhotoFrame
» Aconrmationmessageisdisplayed.
6 Select [Yes], and then press OK to
conrm.
» When the upgrade is complete, the
PhotoFrame reboots.