27
English
EN
6 Use your
Smartphone as
a virtual remote
control
You can turn your Smartphone into a virtual
remote control to operate this device.
What you need
An iPhone or Android enabled
Smartphone
A wireless home network
Before you start
Connect NP3300 to your home network
(see 'First-tim setup - Connect to home
Wi-Fi/wired network').
Connect your iPhone or Android enabled
Smartphone to the same home network.
manual.
Download the application
Download the Philips application MyRemote
(my remote control) from Apple's App Store
or Android Market Place. This application is
free.
1 Tap the App Store icon on your iPhone.
Or tap the Market icon on your
Android enabled Smartphone.
2 Search for 'Philips MyRemote' in the App
Store or Market.
3 Follow the instructions on your
Smartphone to download the application.
» The Philips MyRemote icon is
added to the home screen of your
Smartphone.
Access the smartphone
application
Access the MyRemote application from your
then identify your network music player on the
home network.
1 Tap MyRemote on your iPhone or Android
enabled Smartphone.
» The Smartphone searches your home
network. Your network music player
and the other compatible devices on
the network are displayed on your
Smartphone.
2 Tap your network music player on the
Smartphone.
» The home screen of the virtual
remote control is displayed on the
Smartphone.
3
check the network connection.
Devices (Devices) tab on
your Smartphone to search again.
4
button on your Smartphone.
Use the virtual remote control
1 Launch the application on your iPhone or
Android enabled Smartphone.
» The home screen of the virtual remote
control is displayed.
2 Tap an icon on the home screen to select
the source you want.
3 Tap [Now Playing] at the bottom of the
screen.
4 Tap control buttons on the [Now Playing]
screen to select different operations.
Note
Some control functions are not available on iPhone or
Android enabled Smartphones.
To Next Page
Loading...
