EasyManua.ls Logo

Philips Streamium NP3300 - Page 33

Philips Streamium NP3300
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32 EN
To play a song or Internet radio station as the
next alarm sound
1 Ensure that you have selected [Music] in
the Step 3 above;
2 

 Go to [Media Library]
play the desired song;
 [Internet Radio]
the desired station.
Use the alarm


Note
The alarm sounds even if you have switched NP3300
to active standby or Eco standby.

to a music library or an Internet radio station.
NP3300 is unmuted if it has been muted.
The alarm sounds in a higher volume if the volume level
is lower than minimum.
To snooze the alarm
 Press any button on the unit or the remote
control (except for the volume buttons).
» The alarm sounds again 15 minutes
later. The alarm icon remains.
To stop the alarm
 Press and hold
or .
 Or press
/ALARM OFF on the
remote control.
» The alarm is stopped.
» The alarm sounds again next day.
To turn off the alarm
 Go to [Settings] > [Clock settings] >
[Alarm]. Select [Alarm off] and press OK
on the remote control.
Sleep timer

turned off automatically after the set timer
duration.
To set the time duration
1 [Settings] >
[Clock settings] > [Sleep timer].
 SETTINGS on the remote
control to enter [Settings].
2 Select an option. Press OK to turn it on.
Tip
You can also press SLEEP/TIMER on the remote
control repeatedly to set the time duration.
Date and time
The date and time can be set automatically or
manually.
Automatic setting

service over the Internet.
Through the online service over the Internet
1 
 Ensure that the unit is connected to
the home Wi-Fi/wired network and
Internet.
2 [Settings] >
[Clock settings] > [Date and time].
 SETTINGS on the remote
control to enter [Settings].
3 In [Date and time][Current date
and time] > .
» The unit starts auto time setting over
the Internet.
» A message appears when the setting
is done.
All manuals and user guides at all-guides.com

Related product manuals