Philips TAA4205 - Use your headset; Connect the headset to your Bluetooth device; Heart rate monitor

Use only the original USB charging cable to avoid any damage.
Finish your call before charging the headset, as connecting the headset for charging will power
the headset off.
Connect the supplied USB charging cable to:
The USB charging slot on the headphones and;
The charger/USB port of a computer. LED turns
white during charging and turns off when the headphones in fully charged.
Tip
Normally, a full charge takes 2 hours.
Pair the headphones with your mobile phone
Before you use the headphones with your mobile phone for the first time, pair it with a mobile phone.
A successful pairing establishes a unique encrypted link between the headphones and mobile phone.
The headphones store the last 4 devices in the memory. If you try to pair more than 4 devices, the
earliest paired device is replaced by the new one.
1. Make sure that the headphones are fully charged and turned off.
2. Press and hold Multi-function button for 4 seconds until the blue and white LED flashes
alternately.
3. Make sure that the mobile phone is turned on and its Bluetooth feature is activated.
4. Pair the headphones with the mobile phone. For detailed information, refer to the user manual of
your mobile phone.
Use your headset
Connect the headset to your Bluetooth device
1. Turn on your mobile phone/ Bluetooth device.
2. Press and hold Multi-function button to turn the headphones on The blue LED flashes. The
headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically.
If the last one is not available, the headphones try to reconnect to the second last connected
device.
Tip
If you turn on the mobile phone/Bluetooth device or activate the Bluetooth feature after turning
on the headphones, you have to reconnect the headphones and mobile phone/Bluetooth device
manually.
Heart rate monitor
1. To turn on/off the built-in heart rate monitor, press and hold heart rate button for 2 seconds.
2. Heart rate sensor is located inside the right earbud.
3. Press the heart rate button for a heart rate BPM notification.
Note