Philips TAP4805 - User Manual

Questions and Answers

D
Dr. Frank Rodriguez MDSep 22, 2025
Why some picture elements do not light up on Philips Digital Signage?
- J
  Jose SmithSep 22, 2025
  This display is manufactured using an extremely high level of precision technology: however, sometimes some pixels of the display may not display. This is not a malfunction.
L
Lisa BeasleySep 23, 2025
What to do if the picture on my Philips Digital Signage is distorted?
- E
  Eduardo GardnerSep 23, 2025
  If the picture is distorted with abnormal patterns, it could be due to these reasons: 1. The signal cable is not connected properly. Make sure that the signal cable is firmly attached. 2. The input signal is beyond the display's capabilities. Check the video signal source to ensure it is within the display's range, referring to the display’s specification section.
W
William SmithSep 23, 2025
What to do if the Philips Digital Signage image doesn’t fill the screen?
- R
  Roberto LewisSep 23, 2025
  If the display image doesn’t fill up the full size of the screen, it could be due to: 1. The zoom mode is not set correctly. Use the Zoom mode or Custom zoom function in the Screen menu to fine-tune display geometry and time frequency parameter. 2. Scan Mode may be set incorrectly to underscan. 3. If the image exceeds the screen size, Scan Mode may need to be set to Underscan.
A
Alan GreenSep 23, 2025
Why is there interference on my Philips Digital Signage display?
- W
  Wanda ConleySep 23, 2025
  Interference displayed on the display or audible noise is often caused by surrounding electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
A
Ashley RaySep 23, 2025
Why do I see after-images on my Philips Digital Signage?
- J
  Jacqueline PittmanSep 23, 2025
  After-images can occur if a still picture is displayed for an extended period. To prevent this, avoid displaying a still image for an extended period of time, as this can cause a permanent after-image to remain on the display.
J
Jennifer HillAug 31, 2025
Why is coffee leaking from the dispensing spout of my Philips Coffee Maker?
- A
  Adrienne JonesAug 31, 2025
  If coffee leaks from the dispensing spout of your Philips Coffee Maker, the spout is likely clogged. Clean the coffee dispensing spout and its holes.
M
michael10Aug 25, 2025
Why can I see picture but no sound is heard on my Philips Monitor?
- E
  Erin HeathAug 25, 2025
  If you can see a picture but hear no sound on your Philips Monitor, check the following: 1. Ensure both video and sound input cables are correctly connected. 2. Make sure the volume isn't turned all the way down; press the volume buttons to increase it. 3. Verify that Mute is off using the Mute button. 4. If using external speakers, ensure they are connected and the volume is at a suitable level.
A
Amanda WalshAug 25, 2025
How to fix a Philips Coffee Maker that does not turn on?
- M
  Martin HardinAug 26, 2025
  If your Philips Coffee Maker doesn't turn on, ensure it's properly connected to the electric network and that the power button is switched to the “I” position.
T
Taylor JohnsonAug 26, 2025
Why can't my device connect to my Philips Speaker System soundbar?
- M
  Monica NavarroAug 26, 2025
  If a device cannot connect with your Philips soundbar, it might be due to several reasons. The device may not support the compatible profiles required for the soundbar. Ensure you have enabled the Bluetooth function of the device (refer to the device's user manual). Also, check if the device is correctly connected. If the soundbar is already connected to another Bluetooth device, disconnect that device and try again.
J
Joshua RiversAug 27, 2025
How to reset Master PIN Code on Philips Door locks?
- S
  Susan AdamsAug 27, 2025
  If you forgot your Master PIN Code for your Philips Door locks, perform a factory reset. This will clear all PIN codes, and the Master PIN Code will revert to the default: 12345678.

This document is a user manual for the Philips TAP4805 Portable DVD Player, part of the 4000 Series of Portable DVD Players.

Function Description

The Philips TAP4805 is a portable DVD player designed to play digital video discs conforming to the universal DVD Video standard. It offers true cinema picture quality and stereo or multi-channel sound, depending on the disc and playback setup. Users can select sound tracks, subtitle languages, and different angles of view. The player also allows for parental control to restrict the playback of discs unsuitable for children. In addition to DVDs, it supports various disc formats and media types, including USB storage devices and SD/MMC cards. The device comes with a main unit and a separate monitor, allowing for dual-screen viewing, particularly useful in a car setting with the included headrest mounts.

Important Technical Specifications

Playable Media:

DVD, DVD-Video, VCD, SVCD, Audio CD
DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL (Dual Layer)
CD-R/-RW (maximum 64 folders and 999 files)
USB storage device

Supported File Formats:

Video: .avi
Audio: .mp3, .wma
Picture: .jpg, .jpeg

USB:

Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
File system: FAT16, FAT32
Maximum number of albums/folders: 64
Maximum number of tracks/titles: 999
USB port: 5V ===, 400mA
Supports USB HDD (Hard Disc Drive); an external power source may be needed.

Video:

Signal system: PAL, NTSC, AUTO
Composite video output: 1 Vp-p (75 ohm)

Audio:

2-channel analog output
Audio Front L&R: 2 Vrms (47k Ohm)

Main Unit:

Dimensions (W x H x D): 248 x 168 x 40 mm
Net Weight: 0.66 kg

Monitor:

Dimensions (W x H x D): 248 x 172 x 35 mm
Net Weight: 0.35 kg

Power:

Power supply rating Input: 100-240V~, 50/60Hz
Power supply rating Output: DC 12V, 2.0A
Power consumption: < 13 W
Power consumption in standby mode: < 0.5W

Laser Specification:

Type: Semiconductor laser InGaAIP (DVD), AlGaAs (CD)
Wave length: 650 nm (DVD), 790 nm (CD)
Output Power: 7.0 mW (DVD), 10.0 mW (VCD/CD)
Beam divergence: 60 degrees

Region Code:

This player can play discs with region code 2 (EU).

Usage Features

Battery and Power:

The device features a rechargeable battery. Charging is done via a supplied AC adaptor or car charger. A red indicator light signifies charging, turning yellow when fully charged (approximately 3.5 hours for a full charge).
The main unit has a DC IN 12V socket for power supply and a DC OUT jack to power the monitor.

Connectivity:

Main Unit: Includes a headphone jack, AV OUT for connecting to the monitor or an external display, SD/MMC slot, USB port, DC OUT, and DC IN.
Monitor: Features DC IN (from main unit), AV IN (from main unit), and a headphone jack.
The main unit and monitor are connected using a supplied AV cable for video/audio signal and a DC power cable.

Controls:

Main Unit: LED display, speakers, OPEN button for disc compartment, play/pause (►), stop (■), MENU, VOL- (reduce volume), VOL+ (increase volume), OFF & ON switch.
Monitor: LED display, speakers, VOL- (reduce volume), VOL+ (increase volume), MENU (short press for settings, long press to turn off), scroll down (▼, also mutes sound), scroll up (▲, also turns off display info), DC IN, AV IN, headphone jack, OFF & ON switch.
Remote Control: Comprehensive controls including power (ن), SOURCE (switch input mode), A-B (repeat section), skip previous/fast rewind (4/◄◄), skip next/fast forward (►►/►), SETUP, scroll up (▲), scroll left (◄, also reduce volume), scroll down (▼), stop (■), number keys (0-9), GOTO (skip to title/chapter/track), MUTE, DISPLAY (screen info), SUBTITLE, REPEAT, AUDIO, MENU (main menu), ENTER (confirm), scroll right (►, also increase volume), play/pause (►), PROG (programming menu).

Playback Features:

Disc Playback: Supports various DVD and CD formats.
USB/SD/MMC Playback: Allows playing media from USB storage devices and SD/MMC cards.
Photo Playback: During a photo slideshow, the remote control can be used to access photo preview, flip photos, rotate photos, and play photos sequentially.
Repeat Play: Options to repeat the current title, chapter, track, or the entire disc/USB contents. Can be cancelled by holding REPEAT until [Off] is displayed.
Skip Play: Allows skipping to a specific title, chapter, track, or time using the GOTO function and number keys.
Auto Play: If enabled, the player will automatically play disc contents after reading.

Settings:

System Setup: TV System, POWER RESUME (resume playback after power-off), AUTO PLAY, TV type, Password, Rating, Default (reset to factory defaults).
Language Setup: OSD Language, Audio Lang, Subtitle Lang, Menu Lang.
Audio Setup: Key (lifting/falling adjustment), EQ (equalizer for different music styles: STANDARD, CLASSIC, ROCK, JAZZ, POP).
Video Setup: Adjust Brightness, Contrast, Hue, Saturation, and Sharpness.
Digital Setup: Dual mono (Stereo, Mono L, Mono R, Mix Mono).
Auto Standby: Enables/disables automatic standby after 15 minutes of inactivity.
Monitor Settings (accessed via monitor's MENU button): PICTURE (Brightness, Contrast, Color, English subtitle language), VOLUME, OPTION (RESET to factory default), SYSTEM (S-ROLOC, AUTO, video type PAL/AUTO/NTSC), CLOCK (sleep and wake times).

Car Usage:

Includes headrest mount straps (2pcs) for attaching the main unit and monitor to car seat headrests.
The remote control can be used by pointing it towards the remote sensor of the main unit.

Maintenance Features

General Care:

Do not insert objects other than discs into the disc compartment.
Avoid inserting warped or cracked discs.
Remove discs if not using the product for an extended period.
Clean the product only with a microfiber cloth.

Software Update:

Users can download software updates from the Philips website.
The software file (named 8202KD.BIN) should be copied to a USB drive.
Insert the USB drive into the player (with no disc inside) to automatically upgrade the software.
It is crucial not to interrupt the power supply during a software update, as this can render the machine unusable.

Battery Maintenance:

Keep batteries away from heat, sunshine, or fire.
Do not mix different brands or types of batteries.
Remove batteries from the remote control if it will not be used for long periods.
Dispose of batteries properly to protect the environment.
Coin-type batteries (if present in product/remote) should be kept out of reach of children.

Safety Precautions:

Hearing Safety: Listen at moderate volumes, avoid adjusting volume as hearing adapts, and do not use headphones in hazardous situations (e.g., while driving). Prolonged exposure to sound, even at safe levels, can cause hearing loss.
Electric Shock Risk: Never remove the casing, expose to rain/water, or place liquid containers near the product. Disconnect immediately if liquids spill. Do not place near naked flames or heat sources. Do not insert objects into ventilation slots.
Short Circuit/Fire Risk: Ensure power voltage matches product specifications. Avoid pressure on power plugs.
Injury/Damage Risk: Do not disassemble to avoid laser radiation exposure. Do not touch the optical lens. Do not place objects on power cords. Allow product to reach room temperature if transported below 5°C before connecting.
Overheating Risk: Do not install in confined spaces. Ensure at least 10 cm ventilation space. Do not cover ventilation slots. Do not use in tropical climates.
Contamination Risk: Do not mix batteries. Replace batteries with the same or equivalent type. Dispose of batteries properly.

Troubleshooting:

The manual provides guidance for common issues such as no picture, no sound, disc not readable, and USB storage device issues. Users are advised to check connections and settings before seeking service.
For support, users can register their product at www.philips.com/support and will be asked for the model and serial number (located on the bottom of the player).