VARI❋LITE® - VL1000™ ERS LUMINAIRE SERVICE MANUAL
6 14-May-2009 02.9663.0010 F
Component Descriptions
External Luminaire Components
The following illustration shows the external luminaire components and controls.
ENTERMENU
Head Assembly
Lamp Power
Data In Data Thru
Beam Adjustment Controls
Input Panel
* Do not remove or use to access lamp.
Menu Display
Input Panel Connections
Provides DMX In and
Thru, and AC Power
Used to input manual
commands, program, test,
set defaults and access
Contains power supply,
and ignitor board (arc
Houses color, gobo, dimmer, strobe,
and optional shutter or iris mechanisms.
Provides frame for
optional silks, frosts, color.
Lamp Power
Yoke Leg (Power)
Accessory Frame Holder
Backcap Assembly
Provides access to lamp
for replacement and
provides controls for
Beam
Adjust
Screws *
Menu Display Controls
Accessory Frame Holder
Accessory Frame
Gel, Silk
Latch
correction or top hats.
internal status information.
beam adjustment.
Up / Increase
Down / Decrease
LCD Display
Press to select current menu
option or current data value.
Press to
show menu,
or if at first
level, the
current
address.
Input Cable
connections.
Input Cable
3-Pole Neutrik
Locking Connector
for AC Input
See detail...
or Frost
Accepts frames
or top hats
Base
Provides hook mounting
holes and safety cable
connection.
Address
units) or dimmer (dimmer
units).
Contains main control
PCB and display PCB.
Yoke Leg (Control)
To Next Page
Loading...
