Philips Voice Tracer VTR8800 - Voice Playback; File Editor

46 EN
EN 47
English
6.2 File editor
Choose the recording file and shortly press to play.
During the playback, shortly press button,
and Append, Insert, Divide and Cut icons will appear on
the display.
This function will be unavailable if no operating after 8
seconds.
If the earphone is plugged in, the speaker is disabled.
Append: press to confirm, a recording will be inserted
into the end of the current-playing file.
Insert: press to confirm, a recording will be inserted
into the current-playing point of the file.
Divide: press to confirm, the current-playing file will be
divided to two files.
Cut: press “focus” to set where to begin and press to
end,
And this section will be cut;
Do not press “focus” to set the starting point, and press
at a point of the file,
the file will be cut from the point to the end.
Note
Note
•
9 When playing, press “ ” or “ ” for a few seconds to
fast forward or backward.
•
•
•
•
6.1 Voice playback
1 In the Stop Mode, press “INDEX” button to select the
folder you prefer.
2 Press “ ” or “ ” to select a le to play.
3 Press “MENU” button, select le list icon, press button
into le list. Press “+” or “-” to select a le to play and then
press to conrm.
4 Press Play button to start playing, “record / playback”
indicator will turn green.
5 Press “+” and “-” to adjust volume.
6 Press button to stop playing. When the playing is
stopped, press button to select the menu icon, press
button to conrm into the setting mode.
7 In the stop state, press button, can display the le
details.
8 When playing, press to pause, press again to
continue playing.