56 EN
On this interface, users can select “Set date” or “Set time”
set the time when the device starts recording automatically.
The second function is the recording duration. You can set
the recording duration to 30, 60, 120 minutes or Available
memory. The recording duration setting as follows:
During the course of recording, the auto divide feature
recording enables recordings to be saved automatically into
a new file every 30 or 60 minutes. The auto divide feature
recording interface is as follows:
This is a practical function of recording, no button operation
is needed. When the function is enabled, in the course of
recording, if no voice is detected, the device will automatically
pause recording after 3 seconds; if voice is detected again, the
device resumes recording. See the below related reference
picture:
8.3 Display setting
Language
Auto divide
Voice activation
From the Language menu you can choose a language as
system language. See the following interface picture:
To Next Page
Loading...
