EN 43
When using XLR connector,
How to charge the XLR:
5.3 Use an XLR interface to record
5.2 Telephone Record
the external microphone, the built-in microphone is disabled.
Please note that the plug of the external microphone must
be stereo plug and do not support recording when the device
directly connects to speakers.
Line in recording is a way of recording sound by connecting
the device to an audio equipment’s audio output via a stereo
audio cable (audio equipments such as radio, CD, VCD, DVD
etc.). Use the stereo audio cable provided with the device
to connect the audio equipment’s audio output with “Line
in” jack of the device. The recording operation is the same
as recording with microphone. Before recording with Line
in jack, please adjust the volume of the sound source to a
suitable level, otherwise the recorded sound may lack fidelity.
Use a USB cable to connect XLR with PC.
Use dedicated charger to recharge.
When the XLR connector is charged as described above,
Line in Record:
Connect the telephone cable provided with the device and
external telephone cable to the telephone adapter. According
to the drawing, the operation is the same as recording with
microphone.
When recording external audio source, please adjust
the volume to an appropriate value.
please connect XLR connector with its socket first,
Then start to record according to built-in microphone
recording method.
After XLR connector is connected,
the outer microphone will auto shut-off, except
multichannel recording.
Note
•
1
2
3
•
•
To Next Page
Loading...
