54 EN
8.2 Record settings
Channel selection
Recording performance
File: repeat continuously the current track.
Folder: Repeat tracks on a play list.
Random: Play randomly tracks in selected folder.
Off: Play tracks sequentially in selected folder. After
playing all the tracks in the current folder, the playing stops
automatically.
High: Use high performance ADC to collect data. Support
up to 96 KHZ, 24 bits PCM recording with higher power
consumption.
Mid: Use built-in ADC to collect data. Support up to 48
KHZ, 16 bits PCM recording with lower power consumption.
Record settings includes: Record performance, Select channel,
Quality settings, Timer, Voice activation and Auto divide. You
can change settings according to your preference.
It's used to choose recording data collection channels. The
channels include: Two MIC, LINE IN, XLR, One MIC, Two
MIC+XLR, Two MIC+ One MIC, Line in+ One MIC and Line
in+ XLR. The interface is as shown on the following picture:
Record performance includes: High and Mid. Record
performance
Interface is as follows:
To Next Page
Loading...
