EN 55
Quality settings
Timer
You can change record types according to your preference.
Quality setting includes: WAV 24Bit/96KHZ, WAV
16Bit/96KHZ, WAV 16Bit/48KHZ, WAV 16Bit/32KHZ, MP3
192kbps, MP3 128kbps, MP3 96kbps, MP3 64kbps and MP3
32kbps. Quality settings interface is as follows:
Two MIC: Use the built-in microphones on the two sides to
record.
LINE IN: Use the external microphones to record.
XLR: Use the XLR channel to record.
One MIC: Use the middle built-in microphoneto record.
Two MIC+XLR: Use the built-in microphones on both sides
and the XLR channel to record.
Two MIC+ One MIC: Use the built-in microphones on the
two sides and the middle built-in microphone to record.
Line in+ One MIC: Use the external microphone channels on
both sides and the middle built-in microphoneto record.
Line in+ XLR: Use the external microphones on both sides
and the XLR channel to record.
Timer: first pre-set a length of time, when system time
reaches the pre-set time, the system automatically starts
recording. On the functions menu, choose the “Timer”,
then press the REC button to enter “Timer” setting. See the
below reference picture:
The interface of Set the begin is as follow:
To Next Page
Loading...
