EN 57
Date/time
Backlit
The backlight time function can be set at: 20, 30, 45, 60
seconds and on. If there’s no operation on the device for the
set time, the backlight turns off automatically. If you select
on, the backlight is to be always. See the below picture of
Backlight Time setting:
On this interface, users can set the current time and the time
display format.
When select “Set time format”,the device shows the picture
as follow:
From the list, users can choose one of two time display
format: 12-hour clock or 24-hour clock. The default setting is
12-hour clock.
For example, when select ”Set date”,the device shows the
picture as follow:
8.4 Device settings
See the below picture of Date/time:
To Next Page
Loading...
