58 EN
On this interface, press “ ” or “ ” to select year,
month and day. Then press “+” or “-” to change the relevant
numbers.
When select “Set Time”,the device shows the picture as
follow:
On this interface, press “ ” or “ ” to select hour,
minute. Then press “+” or “-” to change the relevant
numbers.
If there’s no operation on the device for a set time, the
system automatically shuts down. If the time is set at 0, the
system will not automatically shut down. See the below auto
off picture:
You can format the device’s internal storage by using this
function.
When recording, the REC/PLAY led will light, using the
function.
In stop state, press buttons and the device will sound shortly,
when enable this function.
You can select built-in memory or external micro SD to play
or record by using this function.
Auto off
Format device
Record light
Device sounds
Memory select
To Next Page
Loading...
