Philips VoiceTracer DVT1120 User Manual

26 Settings
Table of contents
8.1.5 Setting auto divide
You can automatically divide large recordings, such as a multi-hour
meeting recording. Once the set time has been reached, the device
stops the current recording and automatically starts a new one.
1
In stop mode (start-up screen), press MENU for at least two
seconds.
2
Press e to select the DIVIDE function.
3
Press h / b, to select whether longer recordings are to be
automatically divided after 30 or 60 minutes, or switch the feature
o.
4
Press the record key, g, to confirm.
5
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
8.2 Device settings
8.2.1 Enabling/disabling key and signal tones
1
In stop mode (start-up screen), press MENU for at least two
seconds.
2
Press e to select the BEEP function.
3
Press h / b, to enable/disable the key and signal tones.
4
Press the record key, g, to confirm.
5
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
8.2.2 Auto-o
The device switches o automatically if no key is pressed within a pre-
set period of time. This saves power.
1
In stop mode (start-up screen), press MENU for at least two
seconds.
2
Press e to select the AU OFF function.

Philips VoiceTracer DVT1120 Specifications

General

Sample rate	12 kHz
Audio quality	- bit
Frequency range	750 - 18000 Hz
Product color	Gray
Compatible operating systems	Windows 10/8/7, macOS
Headphone outputs	1

Weight and Dimensions

Weight	46 g
Dimensions (WxDxH)	34 x 108 x 19 mm