38
a My Set Top Box does not switch to programme number 12
b Please check that you entered the correct code number. Repeat step 6 .
b Also try other code numbers.
b Please make sure that the IR electronic eye on the Set Top Box is not
blocked.
b You may wish to reposition the IR Sat control (repeat steps 1 and 6 ).
8 Confirm the correct code number with OK .
9 Affix the satellite control to the Set Top Box using the adhesive strip
on the bottom of the satellite control.
0 To end, press the MENU button.
The satellite control has now been successfully installed.
Further information regarding the use of the satellite control for programmed recordings is
included in chapter 'Programming a recording (TIMER)'.
IR-CODE table
Set Top Box Provider Country code number
AMSTRAD DRX 100 Sky Digibox Sky UK 3
ASTON Xena 1500 Canal+ FR 13
CANAL+ Canalsatellite Canal+ FR 1
ECHOSTAR D-2500-IP Free-to-Air D, FR, UK 11
GRUNDIG Digibox GDS200/1 Sky UK 3
HUMAXF1-AVCI Free-to-Air D, FR, UK 2
NOKIA D-Box Premiere World D 5, 15
NOKIA 9200S Free-to-Air FR, UK 6
NOKIA 9850T On Digital UK 3
PACE DTR730-IM On Digital UK 12
PACE BSKYB 2200 Sky UK 3
PANASONIC TU-DSB30 Sky UK 3
PHILIPS DTX 6371 On Digital UK 4
SAGEM ISD 3100 TPS FR 14
SAGEM ISD 3200 TPS FR 10
TPS Thomson TPS FR 10
TPS Sagem TPS FR 10
XCOM CDTV 2000 TPS FR 7
XCOM CDTV 350 TPS FR 9
The proper function of the satellite control can only be guaranteed for the listed combinations of
Set Top Boxes and providers in the respective countries. Other combinations could influence the
switching of the programme numbers or may not function properly.
Modifications of the technical specifications of the Set Top Boxes can cause the satellite control
to malfunction.
IR Sat control
To Next Page
Loading...
